manualshive.com logo in svg

Brother DCP-9045CDN, Руководство по обслуживанию

Поделиться
Скачать
Brother DCP-9045CDN Скачать руководство пользователя страница 390

Confidential 

5-30

1.4.21  Sensitivity Adjustment of Registration-mark Sensor (Function code 75) 

<Function> 

This function makes the registration-mark sensor to adjust its sensitivity compulsory. This

 

function makes the machine to check the surface of the belt unit by using the registration-mark 
sensor as well. 

 LCD 

Description 

1 

REGI_SENS ADJUST 
BELT OFF 

Adjust the sensitivity of the registration-mark sensor when the 
belt unit is not operated. This is to check whether the 
registration-mark sensor’s operation is okay or not. 

2 

REGI_SENS ADJUST 
BELT ON 

Adjust the sensitivity of the registration-mark sensor when the 
belt unit is operated. (This adjustment is the same as the 
operation before the color registration.) 

3 

REGI_SENS ADJUST 
BELT CHECK 

Check whether there is no scratch on the surface of the belt 
unit within the detectable range of registration-mark sensor. 

<Operating Procedure> 

(1) Press 

the 

7

 and 

5

 buttons in this order in the initial stage of the maintenance mode. 

“REGI SENS ADJUST” appears on the LCD. 

(2) Press 

the   or    button to select the appropriate term. 

(3) Press 

the 

OK

 button so that the selected operation is carried out. 

Note: 

- If you press the 

OK

 button during the sensitivity adjustment or after the error message 

appears on the LCD, the sensitivity adjustment is started again. 

- In the case that the error occurs, refer to the 

next page

 to check the error description and 

the way to solve it. 

(4)  Upon completion of the above operation, the machine beeps for one second and returns 

to the initial stage of the maintenance mode. 

 

Содержание DCP-9045CDN












































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды