manualshive.com logo in svg

Brother DCP-9010CN, Руководство по обслуживанию

Поделиться
Скачать
Brother DCP-9010CN Скачать руководство пользователя страница 80

2-25

Confidential

3.6.2 Exposure

Exposure is conducted by LED (Light Emitting Diode) arrays.
Four LED arrays for K, Y, M and C are mounted as an LED ASSY on the top cover unit of the 
main unit.  These four LED arrays do not emit different colors corresponding to toner colors, 
and they are the same parts in terms of structure.

Fig. 2-22

On the PCB in the LED array, 4,992 LEDs, which correspond to the total number of the dots of 
the 600-dpi print head, are arranged in a staggered pattern.

 

 The lens array forms image on 

the exposure drum using the light emitted from the LEDs.  The surface potential on the 
exposure drum, which is evenly charged, is lowered by exposure, and consequently image is 
formed.

Fig. 2-23

Memo:

- The focus adjustment of the distance between the LED ASSY and exposure drum is 

made by the lower rollers at the both ends of the LED ASSY, and a fixed distance is 
maintained.

- Maximum print width is 207.44 mm = 4,900 dots.

LED ASSY

LED array

LED array

Lens array

Roller

Exposure drum

LED array

LED ASSY

Roller

Exposure drum

* Figure of the front view

* Figure of the side view

Содержание DCP-9010CN























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды