Brother DCP 7065DN, Руководство по обслуживанию

Страница: 279 / 337

5-13
Confidential
1.4.8
Operational check of control panel button (Function code 13)
<Function>
This function allows you to check if the buttons on the control panel work properly.
<Operating Procedure>
(1) Press the 1 and 3 buttons in this order in the initial state of the maintenance mode.
In the case of the model without the numeric keys; Press the or button. The
“MAINTENANCE 13” appears on the LCD. Then press the OK button.
The “00” will appear on the LCD.
(2) Press the buttons in the order designated in the illustration shown below. The LCD
shows the corresponding number in decimal notation each time a button is pressed.
Check that the displayed number is correct by referring to the illustration below.
When the buttons are pressed in an incorrect order, a warning beep goes off and
“INVALID OPERATE” appears on the LCD at the same time. Press the Stop/Exit button,
and the press the correct buttons.
(3) After the last number button is pressed, the machine beeps for one second and returns
to the initial state of the maintenance mode.
■
MFC-7460DN/7470D/7860DN/7860DW
Fig. 5-5
■
MFC-7360/7360N
Fig. 5-6
■
HL-2280DW/DCP-7055/7057E/7060D/7065DN/7070DW
Fig. 5-7
Memo:
• When the Stop/Exit button is pressed, the machine beeps for one second and returns
to the initial state of the maintenance mode.
1
2
3
4 5
6 7 8
9 10 11
12 13
14 15 16
17 18
22 23
24 25 26
27 28 29
30 31 32
33 34 35
36
37
19
20
21
1
2
3
4 5
6 7 8
9 10
11
12 13 14
17
18
19
15 16
20
22
25
28
31
23
26
29
32
24
27
30
33
34
35
21
1
3
2
4
5
8
7
9
6
10
11