manualshive.com logo in svg

Brother DCP-7057R, Руководство пользователя

Поделиться
Скачать
Brother DCP-7057R Скачать руководство пользователя страница 32

Control panel setup 

27

5

Secondary WINS Server IP Address

5

This field specifies the IP address of the secondary WINS server. It is used as a backup to the Primary WINS 
server address. If the Primary server is unavailable, the machine still can register itself with a secondary 
server. If set to a non-zero value, the machine will contact this server to register its name with the Windows

®

 

Internet Name Service. If you have a primary WINS server, but no secondary WINS server, simply leave this 
field blank.

DNS Server

5

Primary DNS Server IP Address

5

This field specifies the IP address of the primary DNS (Domain Name System) server.

Secondary DNS Server IP Address

5

This field specifies the IP address of the secondary DNS server. It is used as a backup to the Primary DNS 
server address. If the Primary server is unavailable, the machine will contact the Secondary DNS server. If 
you have a primary DNS server, but no secondary DNS server, simply leave this field blank.

APIPA

5

With this setting 

On

 the print server will cause the print server to automatically allocate a Link-Local IP address 

in the range (169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the 
Boot Method you have set. (See 

Boot Method

 on page 25.) Choosing 

Off

 means the IP address does not 

change, when the print server cannot obtain an IP address through the Boot Method you have set.

IPv6

5

This machine is compatible with IPv6, the next generation Internet protocol. If you want to use the IPv6 
protocol, choose 

On

. The default setting for IPv6 is 

Off

. For more information on the IPv6 protocol, visit 

http://solutions.brother.com/.

Note

• If you set IPv6 to 

On

, turn off the power switch and then turn it back on to enable this protocol.

• After you choose IPv6 

On

, this setting will be applied to both the wired and wireless LAN interface.

 

Ethernet (wired network only)

5

Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T 
full or half duplex mode by auto negotiation.

Note

If you set this value incorrectly, you may not be able to communicate with your print server.

 

Содержание DCP-7057R

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды