Brother DCP-7030 страница 20 Скачать руководство пользователя

Страница: 20 / 108

Chapter 2

Note

For Legal size paper, press in the inside
latches and pull out the back of the paper
tray.

Put paper in the tray, and make sure that
the paper is below the maximum paper
mark (1). The side to be printed on must
be face down.

CAUTION

Make sure the paper guides touch the sides
of the paper so it will feed properly. If you do
not do this, it may cause damage to your
machine.

Put the paper tray firmly back in the
machine. Make sure that it is completely
inserted into the machine.

Unfold the support flap (1) to prevent
paper from sliding off the face-down
output tray.

Loading paper in the manual
feed slot

You can load envelopes and special print
media one at a time into this slot. Use the
manual feed slot to print or copy on labels,
envelopes or thicker paper.

Printing on plain paper, recycled
paper or transparencies from the
manual feed slot

Note

The machine automatically turns on the
Manual Feed mode when you put paper in
the manual feed slot.

Unfold the support flap (1) to prevent
paper from sliding off the face-down
output tray, or remove each page as
soon as it comes out of the machine.

Содержание DCP-7030













































































































Результаты поиска

Содержание DCP-7030

Отзывы:

Похожие инструкции для DCP-7030

Бренды по названию

Популярные бренды

Brother DCP-7030, Руководство пользователя

Результаты поиска

Содержание DCP-7030

Отзывы:

Похожие инструкции для DCP-7030

Бренды по названию

Популярные бренды