Brother DCP-7030, Руководство по обслуживанию

Страница: 218 / 315

5-22
Confidential
1.4.12 Received Data Transfer Function (Function code 53)
(MFC-7840W/7840N/7450/7440N/7340/7320 only)
<Function>
This function transfers received FAX data to another machine. It is useful when the machine
cannot print received data due to the printing mechanism being defective.
Note :
The number of files that can be transferred at a time is 99. To transfer 100 files or more, carry
out the following procedure more than one time.
<Operating Procedure>
(1) Press in order the 5 and 3 buttons in the initial stage of the maintenance mode.
The "FAX TRANSFER" appears on the LCD.
(2) To check the number of received files, press the 1 button.
The "1.NO. OF JOBS" appears on the LCD.
Press the OK button, and the number of received files appears, just as "NO. OF. JOBS:
10."
(3) To transfer the activity report only, press the 2 button.
The "2.ACTIVITY" appears.
To transfer received files (together with the activity report), press the 3 button.
The "3.DOCUMENTS" appears. Note that if there is no received file, the "NO
DOCUMENTS" appears.
(4) To transfer the communication list for the latest communication, press the 4 button.
The "4.COM.LIST (NEW)" appears.
To transfer the communication list for last three errors, press the 5 button.
The "5.COM.LIST (ERR3)" appears.
(5) With the "2.ACTIVITY," "3.DOCUMENTS," "4.COM.LIST (NEW)," or "5.COM.LIST
(ERR3)" being displayed, press the OK button.
The "ENTER NO. & SET" appears.
(6) Enter the telephone number of the receiver machine and press the OK button again.
Note :
Be sure to type the telephone number with the numerical buttons. No one-touch dialing is
allowed in this procedure.
The machine displays the "ACCEPTED" for approx. two seconds and starts dialing to transfer
data.
No station ID will be attached. A cover page and end page as shown on the next page will be
automatically attached, instead.