Control panel setup
4 - 9
4
5
Press
▲
or
▼
to select
Change
.
Press
OK
.
6
Enter the Gateway address.
Press
OK
.
7
Press
Stop/Exit
.
5.Node Name
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will
be the name that is registered by the WINS server on your network. Brother recommends the name
BRN_xxxxxx for a wired network or BRW_xxxxxx for a wireless network (where XXXXXX is the last six digits
of the Ethernet address) (up to 15 characters).
(For DCP-340CW)
1
Press
Menu
.
2
Press
▲
or
▼
to select
3.LAN
.
Press
Set
.
3
(For Wired) Press
▲
or
▼
to select
1.TCP/IP(Wired)
.
(For Wireless) Press
▲
or
▼
to select
2.TCP/IP(WLAN)
.
Press
Set
.
4
Press
▲
or
▼
to select
5.Node Name
.
Press
Set
.
5
Press
▲
or
▼
to select
1
to change.
Press
Set
.
6
The Node Name will be displayed.
7
Press
Stop/Exit
.
Note
DCP-340CW cannot change the Node Name from the control panel menu, however the BRAdmin
Professional utility enables you to change the IP address. See
Using the BRAdmin Professional utility to
