Brother DCP-19010CN Скачать руководство пользователя страница 76

Страница: 76 / 136

Cleaning the LED heads

WARNING

DO NOT use any flammable substances,
spray or organic solvent/liquids containing
alcohol/ammonia to clean the inside or
outside of the machine. Doing this may
cause a fire or electrical shock. For more
information see

Important safety

instructions

on page 37.

IMPORTANT

DO NOT touch the windows of the LED
heads with your fingers.

Before you clean the inside of the
machine, turn off the machine. Unplug
the power cord from the electrical
socket.

Fully open the top cover by lifting up on
the handle (1).

IMPORTANT

When the scanner is open, you cannot
open the top cover.

Wipe the windows of the LED heads (1)
with a dry, lint-free cloth. Be careful not
to touch the windows of the LED
heads (1) with your fingers.

Close the top cover of the machine.

Plug the machine’s power cord back into
the electrical socket. Turn on the
machine.

Содержание DCP-19010CN









































































































































Результаты поиска

Содержание DCP-19010CN

Отзывы:

Brother DCP-19010CN, Руководство пользователя, Страница: 76 / 136

Результаты поиска

Содержание DCP-19010CN

Отзывы: