Brother BC-1000 страница 62 Скачать руководство пользователя

Страница: 62 / 68

APPENDIX

—————————————————————————————————————————————————————

The upper

thread breaks.

You have not inserted the needle

properly.

Insert the needle properly.

page 21

The area around the hole in the nee-

dle plate is scratched.

Replace the needle plate.

Contact your retailer or the nearest

authorised service center.

–

The area around the hole in the
presser foot is scratched.

Replace the presser foot.

Contact your retailer or the nearest

authorised service center.

–

The bobbin case is scratched, or has

a burr on it.

Replace the bobbin case.

Contact your retailer or the nearest

authorised service center.

–

You have not used a bobbin that has

been designed for this machine.

Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.

page 11

The lower

thread is tangled

or breaks.

You have not wound the bobbin

thread properly.

Wind the bobbin thread properly.

page 11

The bobbin is scratched or does not

turn smoothly.

Replace the bobbin.

–

The thread is tangled.

Remove the tangled thread and

clean the bobbin case.

page 57

You have not used a bobbin that has

been designed for this machine.

Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.

page 11

Bobbin is set incorrectly.

Reset the bobbin thread correctly.

page 14, 15

The thread ten-

sion is incorrect.

You have not threaded the upper

thread properly.

Correct the upper threading.

page 16

You have not wound the bobbin

thread properly.

Wind the bobbin thread properly.

page 11

You have not threaded the right
combination of thread and needle
for the fabric you are using.

Choose a thread and needle that are

appropriate for the type of fabric.

page 20

You have not attached the presser-

foot holder properly.

Attach the presser-foot holder prop-

erly.

page 25

The thread tension is incorrect.

Adjust the tension of the upper

thread.

page 29

You have not used a bobbin that has

been designed for this machine.

Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.

page 11

Bobbin is set incorrectly.

Reset the bobbin thread correctly.

page 14, 15

The fabric is

wrinkled.

You have not threaded the upper

thread properly or fitted the bobbin

properly.

Thread the upper thread and wind

the bobbin thread properly.

page 14, 15, 16

You have not fitted the spool prop-

erly.

Fit the spool properly.

–

You have not used the right

combination of fabric, thread and

needle.

Choose a thread and needle that are

appropriate for the type of fabric.

page 20

The needle is bent or blunt.

Replace the needle.

page 21

If you are sewing thin fabric, the

stitch is too thick.

Sew with stabiliser material under

the fabric.

page 31

The thread tension is incorrect.

Adjust the tension of the upper

thread.

page 29

Symptom

Possible cause

How to put it right

Reference

Содержание BC-1000





































































Результаты поиска

Содержание BC-1000

Отзывы:

Похожие инструкции для BC-1000

Бренды по названию

Популярные бренды

Brother BC-1000, Руководство по эксплуатации

Результаты поиска

Содержание BC-1000

Отзывы:

Похожие инструкции для BC-1000

Бренды по названию

Популярные бренды