background image

Application of 

Assembly

3 - 42

Needle threading mechanism

Application o

Assembly 

Application of 

Assembly 

Assembly of Thread tension dial assembly

1. Set the upper tension control releaser to the shaft of tension control holder assy, and secure it with the

retaining ring E4.

2. Insert the straight line part of spring (X55821) into the middle one of five holes on thread tension stand,

and set the spring (X55821) to the thread tension stand. And set the thread tension disc presser to the
thread tension stand, and hang the hook part of spring (X55821) on the notch part of thread tension
disc presser. And set the two tension discs and the tension disc plate to the thread tension stand, and
set the tension spring (X55630) and the tension control nut to the bottom side of thread tension stand,
and tighten the tension control stud.

3. Set the tension control knob to the thread tension stand, and secure it with the screw (taptite, bind B

M3X10). And attach the thread tension label to the tension control knob.

4. Align the three tabs of thread tension stand with the three notch parts of tension control holder assy as

shown in the illustration below. And set the thread tension stand to the tension control holder assy, and
turn the thread tension stand in the direction of the arrow, and lock it with the hook.

Taptite, Bind B M3X10

Spring (X55821)

Tension spring (X55630)

Thread tension stand

Upper tension 
control releaser

Retaining ring E4

Tension spring 
(X55630)

Tension control nut

Straight line part

Spring (X55821)

Hook part

Thread tension disc presser

Notch part

Tension discs

Tension disc plate

Tension control stud

Tension control knob

Thread tension label

Taptite, bind B M3X10

Tab

Tab

Tab

Notch part

Notch part

Notch part

Lock

Thread tension stand

Tension control 
holder assy

Hook

Middle one of 
five holes

Thread 
tension stand

Содержание ArtCity140
























































































































































Отзывы: