manualshive.com logo in svg

Brother ADS-2600W, Руководство по обслуживанию

Поделиться
Скачать
Brother ADS-2600W Скачать руководство пользователя страница 12

ix

Confidential

SAFETY INFORMATION

 WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result 
in death or serious injuries.

 CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in 
minor or moderate injuries.

 Important

Important indicates a potentially hazardous situation which, if not avoided, may result in 
damage to property or loss of product functionality.

Prohibition icons indicate actions that must not be performed.

Electrical Hazard icons alert you to possible electrical shock.

Fire Hazard icons alert you to the possibility of fire.

Hot Surface icons warn you not to touch product parts that are hot.

Note

Notes indicates advice about how you should respond to a situation that may arise 
with your machine and/or advice about how the operation of the machine works with 
other features.

This icon indicates that flammable sprays may not be used.

This icon indicates that organic solvents such as alcohol and liquids may not be used.

Содержание ADS-2600W
































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды