Brother ADS-2200, Онлайн руководство пользователя

Страница: 153 / 208

Home > Troubleshooting > If You Are Having Difficulty with Your Machine > Network Problems > Your
Scanner Cannot Be Detected on the Network During Installation
Your Scanner Cannot Be Detected on the Network During Installation
Related Models : ADS-2700W
Cause Action Interface
Your computer is not
connected to the network. Make sure your computer is connected to a network, for example, a
LAN environment or Internet services. For further support, contact
your network administrator. Wired/Wireless
Your machine is not
connected to the network. (Wired network)
Press
Settings
>
Network
>
Wired LAN
>
Wired Status
>
Status
. If the LCD displays
Auto
or
Off
, ask your network
administrator whether your IP address is valid or not.
(Wireless network)
Press
Settings
>
Network
>
WLAN
>
WLAN Status
>
Status
. If the LCD displays
Connection Failed:
, ask your
network administrator whether your IP address is valid or not.
Wired/Wireless
You use security software. • In the installer dialog box, search for the Brother machine again.
• Allow access when the alert message of the security software
appears during the Brother Device installation.
• The following port numbers are used for Brother network
features:
-
Network scanning, Remote Setup
Port number 5566/Protocol TCP
- Network scanning (Brother iPrint&Scan)
Port number 54921/Protocol TCP
- BRAdmin Light
Port number 161/Protocol UDP
• For more information about security software, see Related
Information : Your Brother Machine Cannot Scan over the
Network
Wired/Wireless
You use a Wi-Fi router. The privacy separator on your Wi-Fi router may be enabled. Disable
the privacy separator. Wireless
Your Brother machine is
placed too far from the
Wireless access point/router. Place your Brother machine within about 1 metre of the Wireless
access point/router when you configure the wireless network
settings. Wireless
There are some obstructions
(walls or furniture, for
example) between your
machine and the Wireless
access point/router. Move your Brother machine to an obstruction-free area, or closer to
the Wireless access point/router. Wireless
There is a wireless
computer, Bluetooth-
supported device,
microwave oven, or digital
cordless phone near the
Brother machine or the
Wireless access point/router. Move all the devices away from the Brother machine or Wireless
access point/router. Wireless
Related Information
• Network Problems
149