Brother ADS-2000e, Руководство по обслуживанию

Страница: 37 / 124

2-13
Confidential
3.2 Status Error Messages
Error message Description
Error
codes
Refer
to:
Cover is Open The front cover sensor detected an open front cover.
A4 2-16
Document Jam The document scanning position sensor detected that
the document length was 40 cm or more.
A2 2-14
The document scanning position sensor has not
detected the top of the document even after the
document has been fed for the specified distance.
A3 2-14
Machine Error F9 The country code was not entered correctly.
F9 2-15
Multifeed The double feeding sensor detected multiple
documents.
AB 2-14
Out of Memory The scanned data has exceeded the built-in memory
capacity.
C7 2-15
Replace Pad The page counter for the separation pad has reached
the limit.
- 2-16
Replace Parts The page counters for both the separation pad and the
pick-up roller have reached the limit.
- 2-16
Replace Roller The page counter for the pick-up roller has reached the
limit.
- 2-16
Scan Unable 3B An error occurred during access to the DRAM in the
main PCB ASSY.
3B 2-15
Scan Unable A7 Color parameter in the ROM does not match the first
side or second side CIS unit.
A7 2-16
Scan Unable A9 A scanning error occurred while scanning the image.
A9 2-16
Scan Unable E0 An error occurred in the ROM checksum.
E0 2-15
Scan Unable E1 Program error
E1 2-15
Scan Unable E6 Write error in the EEPROM of the main PCB
E6 2-15
Scanner Error B0 The first side or second side CIS flat cable is not
connected correctly.(This problem occurs only in
maintenance mode.)
B0 2-15
Scanner Error B8 The voltage value was below the lower limit during
scanning.
B8 2-16
Scanner Error B9 The white level does not increase during scanning
although the light intensity was increased.
B9 2-16
Scanner Error BB A white level not within the standard was scanned
when the maintenance mode function "Acquire white
level data and set CIS scan area" was executed.
BB 2-16
Scanner Error BD A black level not within the standard was scanned
when the maintenance mode function "Acquire white
level data and set CIS scan area" was executed.
BD 2-16
Unusable Device A USB device not within the specifications is connected
to the USB terminal, resulting in overcurrent.
CA 2-15