Scanning
40
2
Scanning a document using the WIA driver
(Windows
®
XP/Windows Vista
®
)
2
WIA compliant
2
For Windows
®
XP/Windows Vista
®
you can choose Windows
®
Image Acquisition (WIA) for scanning images
from the machine. You can scan images directly into the PaperPort™ 11SE viewer that Brother included with
your machine or you can scan images directly into any other application that supports WIA or TWAIN
scanning.
Note
• Windows
®
2000/XP do not support Duplex Scan in the WIA driver.
• Duplex Scan is not available for legal size paper.
Scanning a document into the PC
2
There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the
scanner glass. (See
Pre-Scanning to crop a portion you want to scan using the scanner glass
a
Load your document.
b
Start the ScanSoft™ PaperPort™ 11SE software that was installed during the MFL-Pro Suite installation
to scan a document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft™ PaperPort™ 11SE. The
scanning steps may vary when using other software applications.
c
Click
File
, then
Scan or Get Photo...
. You can also click the
Scan or Get Photo
button.
The
Scan or Get Photo
panel appears on the left side of the screen.
d
Click
Select
button.
e
Choose the scanner you are using from the
Available Scanners
list.
Note
Choose
WIA:Brother MFC-XXXX
(
WIA:Brother DCP-XXXX
),
WIA:Brother MFC-XXXX LPT
(
WIA:Brother DCP-XXXX LPT
) or
WIA:Brother MFC-XXXX LAN
(
WIA:Brother DCP-XXXX LAN
).
f
Check the
Display scanner dialog box
on the
Scan or Get Photo
panel.
g
Click
Scan
.
The Scanner Setup dialog box appears.