manualshive.com logo in svg

Brother 2850, Руководство пользователя

Поделиться
Скачать
Brother 2850 Скачать руководство пользователя страница 140

129

   Chapter 19

4

Install the drum unit into the machine. (See 

Replacing the Drum Unit

, page 132.)

5

Close the top cover.

Replacing the Toner Cartridge

The machine can print approximately 2,200 pages with one toner cartridge (TN-8000). When the 
toner cartridge is running low, the display shows 

CHANGE TONER

. Actual page count will vary 

depending on your average document type (i.e. standard letter, detailed graphics). The above 
specifications relate to a 5% black coverage A4 size document.

It is a good idea to keep a new toner cartridge ready for use when you see the toner low warning.

Discard the used toner cartridge according to local regulations. If you are not sure of them, consult 
with Brother dealer for service. Be sure to seal the toner cartridge tightly so toner powder does not 
spill out of the cartridge. When discarding used toner cartridges, keep them separate from domestic 
waste.

It is recommended that you clean the machine when you replace the toner.

The display shows 

TONER EMPTY

 to indicate that the toner is empty. Once this indication 

appears, the machine will not resume printing until you have installed a new toner cartridge.

Steps for Replacing Toner Cartridge

DO NOT refill the toner cartridges. Attempting to use refilled toner cartridges 
and using incompatible toners may cause damage to the machine and such 
damage will not be covered by warranty. Warranty coverage does not apply 
to problems caused by the use of 3rd party consumables. We can only 
recommend the use of genuine Brother consumables.

After you have just used the machine, some internal parts of the machine 
will be extremely HOT! So, never touch the shaded parts shown in the 
illustration below.

HOT!

Inside the Fax Machine

Содержание 2850















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды