manualshive.com logo in svg

Brother 2400c - Color Laser Printer, Руководство пользователя, Страница: 28 / 280

Поделиться
Скачать
Brother 2400c - Color Laser Printer Скачать руководство пользователя страница 28

CHAPTER 2 SETTING UP THE PRINTER

2–1

CHAPTER 2
SETTING UP THE PRINTER

This chapter works as a quick setup guide, which gives you information for setting  up
the printer.

BEFORE USING THE PRINTER

 Warning

This printer is heavy and weighs approximately 36kg (79.37lbs).
When you move or lift this printer, be sure to do so with at least 2
people so that you will not hurt your back.

Checking the Components

After unpacking  the printer, check to see that you have all of the
following parts.

Fig. 2-1  Components in the Printer Carton

!

Caution

The Toner Cartridges, (OPC) Belt cartridge, Oil Bottle and Fuser Cleaner
are packed inside a separate carton as a starter kit. Do not open them now.
Only open them immediately before you want to install them. The (OPC)
Belt Cartridge must not be exposed to light for a long time or damage will
occur.

Printer

Standard Media
Cassette
 (pre-installed)

Power Cord

User’s Guide

Printer Driver
Disks

Toner Cartridges
(Black, Cyan,
Magenta and
Yellow)

Oil Bottle

(OPC) Belt
Cartridge

Fuser Cleaner

Oil Syringe

Содержание 2400c - Color Laser Printer

























































































































































































































































































Отзывы:

Нет отзывов