Brother 2400c - Color Laser Printer Скачать руководство пользователя страница 140

Страница: 140 / 280

CHAPTER 4 CONTROL PANEL

4–77

HEX DUMP MODE

This printer has a useful Hex Dump Mode for checking the print data sent
from your computer. The printer lists the print data in hexadecimal form.

To enter the hex dump mode, follow these steps:

1. Check the power state.

2. Operate the buttons according to the power state.

• If the printer has been turned off, turn on the printer.

The printer starts the self-test and the display shows the following
message.

04 SELF TEST

• If the printer has been turned on, reset the printer with the

Reset

button.

1) Press the

Sel

button to set the printer off-line.

2) Hold down the

Shift

button and press the

Reset

button.

The display will show “RESET PRINTER”.

3) Press the

Set

button with the “RESET PRINTER” selected.

3. Hold down the

Continue

Shift

button.

The printer checks the

Continue

Shift

button at the end of self-test

or printer reset. If the button is held down, the printer enters the hex
dump mode and goes on-line. The display will show the message
“HEX DUMP MODE” and the printer will return to the on-line state.

✒

Note

If the printer returns to the on-line state without displaying the message
“HEX DUMP MODE”, you did not hold down the

Continue

Shift

button immediately after pressing the

Set

button. Try the above steps

once again.

4. Send data from your computer.

When the printer receives data, it starts printing hexadecimal values of
the received data.

Содержание 2400c - Color Laser Printer

























































































































































































































































































Результаты поиска

Содержание 2400c - Color Laser Printer

Отзывы:

Похожие инструкции для 2400c - Color Laser Printer

Бренды по названию

Популярные бренды

Brother 2400c - Color Laser Printer, Руководство пользователя

Результаты поиска

Содержание 2400c - Color Laser Printer

Отзывы:

Похожие инструкции для 2400c - Color Laser Printer

Бренды по названию

Популярные бренды