Brother 2400c - Color Laser Printer Скачать руководство пользователя страница 138

Страница: 138 / 280

CHAPTER 4 CONTROL PANEL

4–75

TEST Button

You can test the printer or print out the list of fonts with the

Test

button.

To do so, hold down the

Shift

button and press the

Test

button. You will

then enter test mode where you may test the printer or print out the list of
fonts.

To test the printer, follow these steps:

1. Press the

Sel

button to set the printer off-line.

2. Hold down the

Shift

button and press the

Test

button.

When you enter test mode, the display shows the first test mode item.

3. Press the

▲

▼

button until the desired test mode appears on the

display.

Display Message

Test Mode

DEMO PAGE

Prints out the demonstration.

TEST PRINT

Performs the printer test and prints
out the test pattern.

PRINT CONFIG

Prints out the list of panel button
settings you have configured for
the printer as user settings.

PRINT FONTS I

Prints out the list of internal or
resident fonts.

PRINT FONTS C

Prints out the list of optional fonts
stored in the font cartridge/card.

PRINT FONTS P

Prints out the list of permanent
download fonts.

exit

Exits from the test mode. The
printer does not perform the test.

Содержание 2400c - Color Laser Printer

























































































































































































































































































Результаты поиска

Содержание 2400c - Color Laser Printer

Отзывы:

Brother 2400c - Color Laser Printer, Руководство пользователя, Страница: 138 / 280

Результаты поиска

Содержание 2400c - Color Laser Printer

Отзывы: