Brother Industries E-100, Руководство по обслуживанию и каталог запчастей

Страница: 25 / 37

2-17
6) Press , and then check that the screen for inserting the thread cartridge appears after
the animation is displayed.
7) Press , and then check that the screen indicating that the needle can be moved
appears.
8) Press , and then check that appears again.
9) Press , and then check that the screen allowing you to select an embroidery pattern or a stored
pattern appears.
10) Press , and then check that the screen for inserting the thread cartridge appears
again.
11) Insert a thread cartridge, and then check that appears.
12) Press , and then check that embroidering starts and appears.
13) Press at anytime to stop embroidering.
14) Press the cassette button to eject the thread cartridge.
15) Press
to move the embroidery frame to a position from where it can be removed.
16) Press to clear the display and turn off the unit.
∗
Since the preset patterns differ according to the model, the displayed icons and icon order shown
here may differ from those displayed by the machine.
(4) Checking the SP sensor, the NP sensor and the thread cutter switch
1) The SP sensor and the NP sensor are working properly if sewing starts up smoothly when is
pressed in step 12 of section (3) (If sewing stops and an error appears, the speed sensor or NP sensor
is malfunctioning.) and if the needle stays within the thread cartridge when sewing is stopped by
pressing
in step 13 of section (3)
2) The thread cutter switch is OK if appears after a thread cartridge is inserted in step 11 of
section (3).
(If the display does not change, the thread cutter is malfunctioning.)
(5) Checking the embroidering positions of side A and side B of the embroidery frame
1) Select test mode 7 .
2) Press . (The carriage moves to its standard position.)
3) Insert a thread cartridge.
4) Place a pre-cut design fabric in the embroidery frame, and then insert the embroidery frame with side
B facing up.
5) Press . (The needle makes one stitch.)
6) Press once. (The embroidery frame is moved 1 pitch inside.)
7) Repeat steps 5 and 6 to sew about 15 stitches.
8) Press a number of times to move the embroidery frame to the innermost position, so that the
thread can be cut.
9) Press the cassette button to cut the thread.
10) Press 20 times to move the embroidery frame fully to the front, and then remove the embroidery
frame.
11) Insert the embroidery frame with side A facing up.
T-7
A-B POS SET