4
V. 1.3-24-04-19
brookvent.co.uk
T: +44 (0) 28 9061 6505
2.0 Safety
The following information must be read carefully to ensure safe installation and
operation of the Brookvent HRV system.
2.1 General Safety
▪
Do not use this appliance for functions other than those described in this booklet.
▪
Never touch the appliance with wet hands.
▪
The unit is only suitable for 230 VAC/50Hz electric mains.
▪
Never modify the fan or electronics, all repairs must be conducted by Brookvent.
▪
Never connect the power if electronics cover is not fitted.
▪
Never connect the power if either of the fan covers are not fitted.
▪
Do not store inflammable products in close proximity to the unit.
▪
If cleaning/ dusting the external surface, do so with a dry cloth only.
2.2 Responsibility of the Installer
▪
Correct Installation, balancing and commissioning of the MHRV unit.
▪
Record measured air flow volumes on each of the valves at High and Low rate.
▪
Compliance to requirements and local additional rules.
▪
Explanation of the ventilation system to the user.
▪
Warning for the user, to check or replace the air filters on time.
▪
All the above, as set out in the latest edition of the Domestic Ventilation
Compliance Guide and the SAP Appendix Q
–
Installation Guide and Checklist
specific to the UK market.
2.3 Responsibility of the Occupant
▪
Replacement of the filters as per the recommended/ required interval.
▪
Cleaning the valves in the rooms regularly to prevent blockage.
▪
To ensure that the system is functioning properly on a regular basis
▪
To use manual boost switches (where provided) to prevent build-up of pollutants
or mould growth.
