14
15
QUICK ACCESS PANEL
PAIRING WITH A DEVICE
The speakers in your massage chair can connect to a Bluetooth
®
enabled
device. (See Page 16 for supported Bluetooth
®
versions.) To pair with a device:
1. Prepare your device to pair using Bluetooth
®
wireless technology, making
sure it is within 33 feet of the massage chair. Refer to your device’s owner’s
manual for details if necessary.
2. Press and hold the Bluetooth
®
button for 1 second. The Pairing LED
indicator is solid blue for 5 seconds as the massage chair searches for
previously paired devices. If no connection is made within 5 seconds, the
massage chair enters Bluetooth
®
pairing mode. The Pairing LED Indicator
flashes blue. Once the massage chair is in pairing mode and your device
is ready to pair, select Energize™ 3D Massage Chair on your device. If
prompted, use 0000 as a PIN for the pairing code. Once Energize™ 3D
Massage Chair is selected, the Pairing LED Indicator changes to solid blue
and a tone sounds to confirm pairing is complete.
3. To enter Bluetooth
®
pairing mode manually, press and hold the Bluetooth
®
button until the Pairing LED Indicator starts flashing blue (approximately 2
seconds of holding the Bluetooth
®
button if Bluetooth
®
is on, 4 seconds of
holding the Bluetooth
®
button if Bluetooth
®
is off).
4. Press the Button to increased the volume. Press the Volume
—
Button to decrease the volume.
5. Press and hold the Bluetooth
®
button for one second to turn Bluetooth
®
mode off.
After the initial pairing of your device, the massage chair should automatically
pair with your device the next time the unit is put into Bluetooth
®
mode.
Depending upon your device, you may have to select Energize™ 3D Massage
Chair in your device’s Bluetooth
®
menu.
To cancel pairing mode, press and hold the Bluetooth
®
button for one second
to turn off Bluetooth
®
mode, or wait 10 minutes for the massage chair to
cancel pairing mode and turn off Bluetooth
®
mode automatically. The Pairing
LED Indicator will turn off.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Brookstone is under license.
Footrest Up
Footrest Down
Backrest Up
Backrest Down
Volume —
Pairing
LED Indicator
Bluetooth
Button
PRODUCT CARE AND STORAGE
Storing the Massage Chair
• Disconnect the massage chair from
the power source after use.
• Keep the massage chair away from
direct sunlight, high temperature or
high humidity.
• Do not put heavy objects on the
massage chair.
• If the outer cover is torn or the
mechanism is damaged, stop using
the chair and contact Brookstone at
866-336-3199.
• Do not store the massage chair
under direct sunlight or in places of
high temperature. This may cause
the upholstery to fade.
Cleaning the Massage Chair
Never use scouring pads, abrasive
cleaning agents or aggressive liquids
such as petroleum or acetone to clean
the chair.
Do not immerse the chair in water.
To clean the massage chair:
• Remove the main plug from the
electrical socket.
• Clean the controller and cords with
a dry cloth. Do not use a moist cloth
or a cleaning agent on the controller
or cords. You may clean the chair
with a cloth dampened with water,
but do not use any solvents or abra-
sive cleaning agents.
• If a damp cloth is used, allow the
chair to air dry. Do not use an elec-
trical dryer. Be sure that the chair is
completely dry before plugging the
power back into the electrical outlet.
• Do not pour any liquids directly onto
the chair.
Caution
Do not use abrasive cleaning agents
like benzene, alcohol, or thinner to
clean the massage chair.
Caution
• Any additional servicing should be
performed by an authorized service
representative. This chair has no user
serviceable parts inside.
The Footrest and
Backrest buttons
perform the same
function as the
Recline and Foot
buttons on the
controller, allowing
you to change
the position of
the Footrest and
Backrest without
using the controller.