10
11
1. Displays 3D massage intensity.
2. Displays time remaining in current
massage program.
3. Indicates whether an automatic
program or a custom option is
activated.
4. Indicates the direction of the
massage rollers, moving upward
or downward.
5. Displays the air intensity level.
6. Displays the massage node
position and direction of
movement.
7. Indicates whether the foot roller is
on or off.
8. Indicates whether the footrest air
cell is on or off.
9. Displays the massage roller speed
level.
10. Indicates whether the heating
function is on or off.
11. Displays the position of active air
cells.
12. Indicates which massage
technique is activated.
13. Displays whether the massage
chair is scanning to determine
your height.
14. Displays massage node width -
narrow, medium, or wide.
LCD Display
General Settings
Press the Power button once to power on the massage chair. The chair moves
to its Home position (legrest slightly raised, backrest slightly reclined, rollers in
upper part of backrest), and the LCD Display lights up. If no selection is made
after 3 minutes, the chair will go into sleep mode and the LCD light will go off.
Any button pressed on the controller will wake the controller from sleep mode.
To power off, ensure that there are no obstacles under the footrest and press the
Power button. The rollers return to their Home position and all air cells deflate.
Click off the main power switch on the back of the chair and unplug the chair.
Press to temporarily pause the massage. The chair will enter idle mode. The air
cells deflate, but the rollers do not return to their Home position. Press again to
resume massage.
Press to increase the depth of the massage node rotation (the 3D massage
effect). There are five 3D levels, with 1 providing the least depth and 5 providing
the most depth.
Press to add time to the length of a custom massage, up to a maximum of
15 extra minutes. Massage time is extended to the closest multiple of 5. Auto
programs last 20 minutes by default and are not extended by pressing this
button. Each massage session should not exceed 20 minutes.
Press to recline the massage chair into zero gravity position, with your feet above
your heart. Press again to return to the upright position.
Press to change the air cell intensity. Press repeatedly to cycle through the five
intensity levels.
Press to add heat to your lumbar and foot areas. Press again to turn off heat.
Press to activate the rollers and air cells in the footrest. Press again to turn off
the foot roller. Press a third time to turn off both the foot roller and the footrest
air cells.
3 D
+5
ZERO
GRAVITY
AIR
HEAT
FOOT
SETTING
CAUTION
Keep hands and legs
away from the gap.