3229
62_I
N
S_Magnet Mount_V
ent_Phone_Holder
Instructions Doc. Size: 210mm W x 101mm H
Folded Size: 7
0mmW x 101mmH
Output at 100% P
rints 1/1 Blac
k
Finishing: T
rim to Crops; Accordian F
old: 2 folds
CAUTION
• Prolonged exposure to heat and cold (e.g., direct sunlight,
a heater or air conditioning) can affect your phone.
• Once the Magnet Mount Vent Phone Holder is in place,
move vents gently.
• The Magnet Mount Vent Phone Holder uses magnets.
Keep away from credit cards and other magnetic media.
• Magnets may interfere with medical devices, such as
pacemakers.
• The adhesive on the metal plates is designed for one-
time use; it cannot be reused if removed.
• If the metal plate is removed, use a nonabrasive cleaning
solution to remove residual adhesive from your phone or
phone case.
• Always keep your eyes on the road and follow local
hands-free laws.
Magnet Mount Vent
Phone Holder
WITH AIR DEFLECTOR
INSTALLATION
1. Squeeze to open the vent clip.
2. Position on a vent. Ensure that the
clamp attaches firmly and the vent
provides a stable base for the phone
holder.
CAUTION:
Position the phone holder
and phone so they do not interfere with
any vehicle operation or block road
vision.
3. Using the alignment notches, place
the deflector on the phone holder
and press to attach.
Use of the deflector is optional.
The deflector channels air around
your phone, helping to keep it
from getting too hot or cold. The
deflector does not block use of
the vent.
4. Peel the paper off one of the
metal plates and attach it to the
back of your phone, to your phone
case, or under the phone case.
Use the larger plate if you prefer
to position your phone horizontally;
use the smaller plate to position
your phone vertically.
Note that placing the metal plate
under a thick protective case may
weaken the magnetic attraction
that holds your phone to the
holder.
5. Place your phone on the Magnet
Mount, allowing the magnetic plate
to securely hold your phone.
