MagnaTran 7.1 User’s Manual
Safety
MN-003-1600-00
Electrical Hazards
Brooks Automation
Revision 2.2
2-7
Electrical Hazards
The proper precautions for operating and servicing electrical equipment must be
observed. These precautions include following facility lockout/tagout procedures,
and any other specified action within the facility where the robot is being used.
The MagnaTran 7 is a hazardous low voltage device. Power Supplies converting facil-
ity power may be operating at higher levels of AC in close proximity of the product.
DANGER
Maximum power consumption for the MagnaTran 7 is +24 VDC at 20
Amps and 480 Watts. Improper handling of the power source or con-
necting devices may induce electrical shock or burn resulting in seri-
ous injury or death or cause an equipment fire.
The proper precautions for operating and servicing electrical equipment must be
observed. These precautions include following facility lockout/tagout procedures,
and any other specified action within the facility where the MagnaTran 7 robot is
being used.
Electrical Hazard: Power exceeds 240 VA. Turn off power before servicing.
Improper electrical connection or connection to an improper electrical sup-
ply can result in electrical shock, burns, fire, and damage to the equipment.
Always provide the robot with the proper electrical codes compliant connec-
tions.
WARNING
All power to the robot must be disconnected per the facilities’ lock-
out/tagout procedure before servicing to prevent the risk of electrical
burn or shock.
HIGH VOLTAGE
