bromic.com
1
Version 2.3 AU/EU/US
PLATINUM SMART-HEAT™
ELECTRIC HEATERS
BY BROMIC
LOW CLEARANCE (LC) CEILING
RECESS INSTALLATION
INSTRUCTIONS
FOR MODELS 3400W & 2300W
WARNING
Instructions below are suitable for ceiling surfaces 10-
30mm (0.39”-1.2”) thick. For ceiling surfaces thicker
than 30mm (1.2”), contact Bromic for alternative
installation options.
!
!
WARNING
Joists, beams and rafters shall not be cut or
notched to install the heater.
!
WARNING
The heater shall, under no circumstance, be cov-
ered with insulating material or similar material.
WARNING
This heater MUST be permanently installed by an
authorised/licenced person. Do not perform
maintenance, or carry out installation or assembly
procedure while electrical power is switched on. Wait 2
hours after switching off the heater before handling.
!
1x
1x
1x
2x
4x
1x
1x
2x
1x
CEILING RECESS
BOX
IP COVER
VENT COVER
BLACK
VENT COVER
WHITE
TERMINAL BOX
HEATER
NOT INCLUDED
WARNING
In ceiling recess installation, the heater must be
completely protected against water contact from
above.
!
IMPORTANT
READ THIS MANUAL CAREFULLY. SEE INSIDE
COVER FOR IMPORTANT INFORMATION
ABOUT THIS MANUAL. KEEP INSTRUCTIONS
WITH APPLIANCE FOR FUTURE REFERENCE.
WARNING
It is important that regular maintenance is carried
out on the heater to maintain appearance. Inspect
and clean more frequently in adverse conditions
such as coastal environments.
TOOLS REQUIRED
8mm (5/16”)
20mm ( 13/16")
!
1000mm (39.3") - 3400W
800mm (31.5") - 2300W
N2 WAGO
CONNECTOR
HARDWARE
8x M3x6
8x M4x8
1x M6x10
TRIM ASSEMBLY
(STANDARD)
TRIM ASSEMBLY
(MARINE)
VENT COVER
TRIMS
2 PERSON
INSTALLATION
OR
