8 June, 2022, www.brodit.com, © 2022 Brodit AB
Product 563914
563914 Charging cradle Fits devices with rugged frame, with and without expansion module/handstrap. With
USB Host and DC power connector (power supply NOT included). For 30 pin.
This holder is the perfect choice when you want to have your device firmly in place within easy reach. Custom fit
for devices with rugged frame, with and without expansion module/handstrap. The holder is made of extra strong
plastic. Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc.
Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when
the device is in the holder.
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply
is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in.
Item no. 941012 Hard wire cable for fixed installation, 12V out, 3A. 12V in.
Item no. 941022 Cable with cigarette ligther plug, straight cable, 12V out, 2,5A. 12/24V in.
Item no. 941021 Hard wire cable for fixed installation, 12V out, 2,5A. 12/24V in.
The holder includes a USB Host connector for Power & Data connectivity (Maximum current: 900mA @ 5Vdc).
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto
a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done
on the customer's own responsibility.
EAN: 7320285639140
Item no 563914 fits:
Zebra ET50 10.1 (For all countries)
Zebra ET51 10.1 (For all countries)
Zebra ET55 10.1 (For all countries)
Zebra ET56 10.1 (For all countries)
