Brocade Communications Systems VDX 8770-4, Руководство по установке оборудования, Страница: 31 / 141

TABLE 6 Installation tasks, time, and items required (continued)
Installation task Time estimate Items required
Ethernet IP addresses for the device and for
both control processor blade (a total of three
addresses).
Installing an Ethernet cable, opening a Telnet
session, and configuring the device domain ID,
date and time, and additional system
parameters. Verify and back up the
configuration. 20 minutes Ethernet cabling (optional) for Telnet access.
Refer to the
Network OS Administration Guide.
Installing transceivers as needed 30 - 60 minutes (up to 30 minutes per
transceiver Copper and optical transceivers and direct-
attach cables as needed
Attaching cables, cable ties, and cable guides 2-3 hours Cables, cable ties, and cable management
comb.
CAUTION
All devices with DC power supplies are intended for installation in restricted access areas only. A restricted access area is where
access can be gained only by service personnel through the use of a special tool, lock and key, or other means of security, and
is controlled by the authority responsible for the location.
Items included with the device
The basic product (SKUs BR-VDX8770-8-BND-AC or BR-VDX8770-8-BND-DC depending on whether you order AC or DC power
supplies) ships with the following items:
∙
A chassis, populated with:
–
Management modules (one)
– Switch fabric modules (three)
– Filler panels for unoccupied slots for all modules
– Power supplies (up to two)
– Power supply filler panels for unoccupied bays
– Fan modules (two)
∙
An accessory kit containing the following items:
–
Console cable (RJ-45 serial cable: There is also an adapter that can be used to provide a DB9-style connector.)
– Wrist strap (ESD grounding strap)
– Ground lug kit
– SFP extraction tool kit
– China RoHS guide
– Cable management comb
– Brocade-branded USB device
– Power cord retainer kit
– Hardware for securing the device in a rack
– Web pointer document
– Air filter
∙
Line cards (up to four) and additional power supplies must be ordered separately.
The rack mount kits must be ordered separately.
Preparing for Installation
Brocade VDX 8770-4 Hardware Installation Guide
53-1002563-10 31