Brocade Communications Systems VDX 8770-4, Руководство по установке оборудования, Страница: 17 / 141

The 6x100 GbE line cards ship with two base 100 Gigabit ports enabled, but can be upgraded to enable six ports through
the 100G Port Upgrade license. This upgrade license is supported by Network OS 5.0.0 and later. Ports support 100 GbE
CFP2 (SR10 and LR4) optical transceivers.
– Up to 192 1/10 Gigabit Base-T Ethernet ports for the 48x10G-T line card.
48x10G-T line cards support fixed 10 GbE Base-T (RJ-45) copper transceivers.
– Up to 108 40 Gigabit Ethernet (GbE) ports for the 27x40 GbE line card. Up to 576 10 Gigabit ports are supported in QSFP
breakout mode.
27x40 GbE line cards support 40 GbE QSFP optical transceivers.
∙
Two slots for management modules:
–
A single active management module can control all ports in the chassis.
– The standby management module takes control of the device if the active management module fails.
∙
Six slots for switch fabric modules that interconnect all line cards.
∙
Modular, hot-swappable field-replaceable units (FRUs):
–
48x10 GbE line card
– 48x1 GbE line card
– 12x40 GbE line card
– 6x100 GbE line card
– 48x10G-T line card
– 27x40 GbE line card
– Two fan assemblies
– Up to four 3000W power supplies, 200-240 VAC auto-sensing or -48 VDC (each power supply connection should be
separately fused)
∙
Cable management comb
Port side view
NOTE
Airflow in the Brocade device is from the port side to the rear (fan side) of the chassis.
The following figure displays a sample configuration of the port side of the Brocade device.
Product Overview
Brocade VDX 8770-4 Hardware Installation Guide
53-1002563-10 17