Brocade Communications Systems ICX 7250 series, Руководство по настройке

Страница: 383 / 483

This example shows that the running configuration contains six route maps. Notice that the match and set statements within each route
map are listed beneath the command for the route map itself. In this simplified example, each route map contains only one match or set
statement.
To display the active configuration for a specific route map, enter a command such as the following, which specifies a route map name.
device# show route-map setcomm
route-map setcomm permit 1
set community 1234:2345 no-export
This example shows the active configuration for a route map named "setcomm".
Syntax: show route-map [ map-name ]
Displaying BGP4 graceful restart neighbor information
To display BGP4 restart information for BGP4 neighbors, enter the show ip bgp neighbors command.
device# show ip bgp neighbors
Total number of BGP Neighbors: 6
1 IP Address: 10.50.50.10, AS: 20 (EBGP), RouterID: 10.10.10.20, VRF: default
State: ESTABLISHED, Time: 0h0m18s, KeepAliveTime: 60, HoldTime: 180
KeepAliveTimer Expire in 34 seconds, HoldTimer Expire in 163 seconds
Minimum Route Advertisement Interval: 0 seconds
RefreshCapability: Received
GracefulRestartCapability: Received
Restart Time 120 sec, Restart bit 0
afi/safi 1/1, Forwarding bit 0
GracefulRestartCapability: Sent
Restart Time 120 sec, Restart bit 0
afi/safi 1/1, Forwarding bit 1
Messages: Open Update KeepAlive Notification Refresh-Req
....
Displaying AS4 details
This section describes the use of the following show commands, which produce output that includes information about AS4s.
• show ip bgp neighbor shows whether the AS4 capability is enabled.
• show ip bgp attribute-entries shows AS4 path values.
• show ip bgp shows the route entries with two and AS4 path information.
• show route-map shows the presence of any AS4 configuration data.
• show ip as-path-access-lists shows the presence of any AS4 configuration data.
• show ip bgp config shows the presence of any AS4 configuration data.
Route entries with four-byte path information
The show ip bgp command without of any optional parameters display AS4 path information.
device# show ip bgp
Total number of BGP Routes: 1
Status codes: s suppressed, d damped, h history, * valid, > best, i internal, S
stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.1.1.0/24 192.168.1.5 1 100 0 90000 100 200 65535
Displaying BGP4 information
Brocade FastIron Layer 3 Routing Configuration Guide
53-1003903-04 383