System Status LEDs on the EPS4000 (Continued)
TABLE 9
LED
State
Description
Amber
Manual configuration mode
Management port LED
(Left down)
Green
Management port link up at 100BASE-T mode
Off
Management port link up at 10BASE-T mode or link is down
Management port LED
(Right down)
Blinking green
Indicates management port receive and transmit activity
Off
Indicates no Ethernet traffic on management port
Items included with the EPS4000
The EPS4000 ships with all of the following items included in your shipping container. Verify the
contents of your shipping container. If any items are missing, contact the place of purchase.
• EPS4000 external power supply
• Read Me First document
• Rack mounting kit containing two L-shaped mounting brackets and eight sink-head screws
• Two-post rack kit containing four rack-mounting screws and four cage nuts
• Four rubber feet
• Console cable
• RJ-45 to DB9 adaptor
• China ROHS sheet
General requirements
To manage the EPS4000, you will need a management station, such as a PC running a terminal
emulation application, for serial connection to the switch. Use the serial connection to perform basic
configuration tasks, including assigning an IP address and network mask to the system. This
information is required to manage the system using the CLI through Telnet or Brocade Network Advisor.
Summary of installation tasks
Follow the steps in the following table to install your device. Details for each of these steps are provided
on the pages indicated.
Installation tasks
TABLE 10
Task number Task
Where to find more information
1
Ensure that the physical environment that will host the
device has the proper cabling and ventilation.
Preparing the installation site
on page
41 section
Items included with the EPS4000
Brocade ICX 7250 Switch Hardware Installation Guide
39
53-1003622-02