Brocade Communications Systems ICX 6650 series Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 83

background image

Installing and replacing a power supply unit

When installing or replacing a power supply unit, keep in mind the following:

•

Power supplies can be swapped in or out while the device is running. The remaining power supply provides enough power for
the device.

•

The airflow direction of the power supply must match that of the installed fan tray. All must be either exhaust or intake.

CAUTION
Remove the power cord from a power supply before you install it in or remove it from the device. Otherwise, the power
supply or the device could be damaged as a result. (The device can be running while a power supply is being installed or
removed, but the power supply itself should not be connected to a power source.)

CAUTION
Ensure that the airflow direction of the power supply unit matches that of the installed fan tray. The power supplies and fan
trays are clearly labeled with either a green arrow with an "E", or an orange arrow with an "I."

Installing an AC power supply

You need a #2 Phillips screwdriver and a flat-head screwdriver for installation.

Brocade recommends using an ESD wrist strap during installation.

FIGURE 18

Installing an AC power supply unit

Use the following steps to install an AC power supply in the switch.

1. If replacing a power supply, remove the previously installed power supply from the appropriate slot by removing the two screws

with a flat-head screwdriver.

Power supplies

Brocade ICX 6650 Hardware Installation Guide

Part Number: 53-1003621-04

35

«
...
33
34
35
36
37
...
»

Содержание ICX 6650 series




















































































Отзывы:

Нет отзывов

Похожие инструкции для ICX 6650 series

Бренд: GE Страницы: 4

Power Xpert Meter 2000

Бренд: Eaton Страницы: 16

POW-R-COMMAND 1000

Бренд: Eaton Страницы: 84

Бренд: National Instruments Страницы: 36

AT-9424Ts/XP AC

Бренд: Allied Telesis Страницы: 3

LoadMaster 1500

Бренд: KEMP Technologies Страницы: 71

Бренд: Ruckus Wireless Страницы: 56

StorTrends 1312-P

Бренд: American Megatrends Страницы: 2

Бренд: Telex Communications Страницы: 28

Бренд: Toto Link Страницы: 55

Бренд: ICP DAS USA Страницы: 62

Бренд: Aethra Страницы: 2

Бренд: Xantech Страницы: 4

E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010

Бренд: Juniper Страницы: 122

Бренд: ADTRAN Страницы: 4

Бренд: Variscite Страницы: 17

NVR2104/2108HS-W-4KS2 1U

Бренд: Dahua Technology Страницы: 363

Monochrome Image Acquisition Device NI 1410

Бренд: National Instruments Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды