Brocade Communications Systems ICX 6430 series Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 108

Brocade Communications Systems ICX 6430 series Скачать руководство пользователя страница 87

Installing a new copper or fiber-optic transceiver

You can install a new fiber-optic transceiver in an SFP or SFP+ slot while the device is powered on and running.

While installing a transceiver, wear an ESD wrist strap with a plug that can be inserted in the ESD connector on the ICX 6430 or ICX
6450 device.

NOTE

If the E1MG-TX SFP transceiver is inserted into the ICX 6450 device, the link may go down on the fiber ports. This is seen
during bootup or speed change from 10-Gbps to 1-Gbps port speed. The workaround is to disable the port and then re-
enable the port through the CLI, or unplug and plug in the cable.

DANGER

For safety reasons, the ESD wrist strap should contain a series 1 megaohm resistor.

DANGER

All fiber-optic interfaces use Class 1 lasers.

Perform the following steps to install a fiber-optic transceiver.

1. Put on the ESD wrist strap and ground yourself by attaching the clip end to a metal surface (such as an equipment rack) to act

as ground.

2. Remove the new transceiver from the protective packaging.

Copper or fiber-optic module replacement

Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide

Part Number: 53-1003617-03

87

«
...
85
86
87
88
89
...
»

Содержание ICX 6430 series













































































































Отзывы:

Нет отзывов