Brocade Communications Systems DCX Backbone, Руководство по установке оборудования, Страница: 57 / 167

Customizing a chassis name
For FOS 6.2.0 and later, the chassis name of the Brocade DCX can be up to 15 characters long; can include letters, numbers, and
underscore characters; and must begin with a letter.
1. Type chassisName followed by the new name in double quotes.
switch:admin> chassisname
"DCX_chassis_1"
Committing configuration...
Done.
2. Record the new name for reference.
Setting the domain ID
Each switch in the fabric must have a unique domain ID. The domain ID can be manually set through the configure command or can be
automatically set. The default domain ID for the Brocade DCX is "1". Use the fabricShow command to view the already assigned domain
IDs.
1. Enter switchDisable to disable the Brocade DCX.
2. Enter configure .
3. Enter y at the "Fabric parameters" prompt:
Fabric parameters (yes, y, no, n): [no] y
4. Enter a unique domain ID:
Domain: (1.239) [1] 3
5. Complete the remaining prompts or press Ctrl+D to accept the settings and exit.
6. Enter
switchEnable to re-enable the Brocade DCX.
Setting the date and time
The date and time settings are used for logging events. Switch operation does not depend on the date and time; a switch with an
incorrect date and time value still functions properly. However, because the date and time are used for logging, error detection, and
troubleshooting, they should be set correctly.
Setting the date
To set the date, follow these steps.
1. If necessary, log on to the Brocade DCX by Telnet, using the admin account.
Setting the date and time
Brocade DCX Backbone Hardware Installation Guide
53-1000685-24 57