28
OMRM
125
PRO
USE OF MACHINE
7
7.3 Angle Setting
7.4 Profile Loading
Cu�ng Table
Angle Adjustment
Ring
Angle Arrow
Cu
tti
ng Table
Rota
ti
ng Arm
The figure no. 1 shows the bolt that fixes the cutting table. This bolt must be loosened before changing the
cutting angle. After adjusting the cutting angle, the cutting table must be fixed again with this bolt.
The figure no. 2 shows the cutting angle adjustment components. After loosening the bolt shown in the
figure no. 1, angle adjustment ring is pulled and the cutting table is rotated by using the rotating arm. Once
the desired angle value is brought onto the angle arrow, the angle adjustment ring is released and again the
cutting table is fixed with the bolt shown in figure no. 1.
It features fast adjustment buffers for 0°, 15°, 30°, 45°, 60°, 75°and 90° angles.
2
1
Meter
Profile Support
Profile Loading Conveyor
Profile support is adjusted via meter depending on the length of the cutting operation to be performed, and
then it is fixed. The profile to be cut is placed on the profile loading conveyor in the direction of arrow as is
shown in the picture, and is contacted with the profile support.
Содержание OMRM 125 PRO
