MODEL AEEPD
AEEPD Telescopic Flue Cover for use with EPD61 Series Outdoor
Range Hood.
Model
Length Width Collapsed Maximum
Height Height
AEEPD2445SS
13”
25”
24”
45”
AEEPD2445SSE
16”
25”
24”
45”
This Kit Contains:
1. (1) Telescopic Flue Cover Bottom
2. (1) Telescopic Flue Cover Top
3. (2) Mounting Brackets
(1) Hardware Bag (Service Part S97019391) Including:
4. (4) #10 x 2” Screws
5. (8) # 8 x 3/8” Screws
Follow hood installation manual steps 1-9 prior to installing
Telescopic Flue Cover, and steps 11-12 to finalize hood
installation.
4 TOTAL
5
5
3
4
2
1
5
24-3/4"
CENTER BRACKETS
WITH CENTER OF HOOD
BOTH BRACKETS
2" FOR AEEPD2445SSE
1/2" FOR AEEPD2445SS
TOP VIEW OF HOOD
HOOD
WALL
Step 1:
Remove protective coating from
Telescopic Flue Cover. Be careful
not to scratch surface of stainless
steel.
Step 2:
Fasten Mounting Brackets (Item 3)
to ceiling using dimensions shown
and (4) #10 x 2” Screws (Included
Item 4). Screws must be fastened
into building structure. Do not fasten
into drywall only or other non-load-
bearing part of structure.
Step 3:
Fasten Telescopic Flue Cover to
Hood using: (4) # 8 x 3/8” Screws
(included Item 5). Arrows show hole
locations on Hood. Hand tighten
screws only.
Step 4:
Extend Telescopic Flue
Cover and fasten to
Mounting Brackets (Item 3)
with (4) # 8 x 3/8” Screws
(Included Item 5).
