background image

MODELS  192 • 194 • 198

Page 1

Wall Heater

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE 

INSTALLING OR USING THIS  HEATER.

To reduce the risk of fire, electric shock, or injury 

to persons, observe the following:
1.  Use this unit only in the manner intended 

by the manufacturer. If you have questions, 

contact the manufacturer at the address or 

telephone number listed in the warranty.

2.  Before servicing or cleaning unit, switch 

power off at service panel and lock the service 

disconnecting means to prevent power from 

being switched on accidentally. When the 

service disconnecting means cannot be 

locked, securely fasten a prominent warning 

device, such as a tag, to the service panel.

3. Installation work and electrical wiring 

must be done by a qualified person(s) in 

accordance with all applicable codes and 

standards, including fire-rated construction 

codes and standards.

4.  When cutting or drilling into wall or ceiling, 

do not damage electrical wiring and other 

hidden utilities.

5.  This heater is hot when in use. To avoid burns, 

do not let bare skin touch hot surfaces. Keep 

combustible materials, such as furniture, 

pillows, bedding, papers, clothes, etc. and 

curtains at least 3 feet (0.9 m) from the front 

of the heater.

6.  Extreme caution is necessary when any 

heater is used by or near children or invalids 

and whenever the heater is left operating 

and unattended.

7. Do not operate any heater after it 

malfunctions. Disconnect power at service 

panel and have heater inspected by a 

reputable electrician before reusing.

8.  Do not use outdoors.

9. To disconnect heater, turn controls to 

off, and turn off power to heater circuit at 

main disconnect panel (or operate internal 

disconnect switch, if provided).

10. Do not insert or allow foreign objects to 

enter any ventilation or exhaust opening, as 

this may cause an electric shock or fire, or 

damage the heater.

11.  To prevent a possible fire, do not block air 

intakes or exhaust in any manner.

12. A heater has hot and arcing or sparking 

parts inside. Do not use it in areas where 

gasoline, paint, or flammable vapors or 

liquids are used or stored.

13. Use this heater only as described in this 

manual. Any other use not recommended 

by the manufacturer may cause fire, electric 

shock, or injury to persons.

14. Install heater at least 6 inches from floor or 

any adjacent wall.

15. To avoid electrical shock: Do not install 

unit in a tub or shower enclosure or any 

location where it may come in contact with 

water. Never place a switch where it can be 

reached from a tub or shower.

16. 

This product may ONLY be installed 

horizontally in a wall. Do not mount in any 

other position.

17.  Do not connect heater to dimmer switch or 

speed control.

18. This product must be grounded.

SAVE THESE INSTRUCTIONS

Содержание 026715022670

















Отзывы: