DiViNe Route 66
4 / 18
rev. 1.2
•
Power Supply
The device can be disconnected from the power supply by pulling the plug. These must be freely
accessible at all times. The device should be disconnected during lightning storms or when unused
for long periods of time. The switched-mode power supplies operate with very high voltages. Coming
into contact with them can lead to considerable electric shock, which may result in death.
Never disconnect the main plug by pulling the cable, always pull the plug itself.
Power-supply cords should be routed in such a way that they are not likely to be walked on, crushed,
pinched, or damaged in any other way. Pay special attention to the plugs and the sockets of the
device.
Replace a damaged power cable immediately.
The device must be grounded; any disconnection of the grounding is not permitted. Always ensure
the correct grounding of the device via the main plug. Never cover the grounding terminal of the plug
by means of insulation material!
•
Fuse
There exists no fuse inside the device. The power supplies are protected for overload conditions due
to their circuitry.
•
Lightning
For additional protection of this device during lightning storms, or when it is left unattended and
unused for a long period of time, unplug the power cord. This will prevent damage to the device due
to lightning and power line surges. Disconnection from the mains power supply can only be achieved
by removing the plug from the mains socket.
•
Interference by means of external objects and/or liquids with the device
Never push objects of any kind into the device through openings in the casing. They may come into
contact with dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the device.
•
Cables and Accessories
Only use attachments specified by the manufacturer.
Only use high quality cable to connect the device. For the optical data connection, you should
exclusively use the specified optical waveguide cables. If not in use, ensure that the optical
connectors of both the device and waveguide are covered with the provided caps.
Do not place this device on an unstable table, tripod, cart, etc. The device may fall, which can cause
injury and serious damage to the device. Any mounting of the device should follow the manufacturer’s
instructions, and should use mounting accessories recommended by the manufacturer.
•
Servicing
Do not attempt to service this device yourself.
This device contains no user serviceable parts: only refer to authorised, qualified service personnel
for any servicing.
The opening of the device is not required for operation as there are no user serviceable components
located inside the device. The operation of an opened device is not permitted. It can lead to damage
of components due to the absence of required ventilation. The device may not be serviced, altered or
modified without authorisation from BroaMan or an BroaMan authorised distributor / dealer. Only
qualified service personnel may carry out repair and maintenance work. The warranty will be voided if
unauthorised maintenance has occurred
.
