broag SEAGOLD 1A HR, Руководство пользователя

Страница: 226 / 259

11
8. ELECTRIC SUPPLY
8.1 General
The electrical installation must conform to the IEE
Regulations for Electrical Installations and also to Local
Authority requirements.
8.2 Electric connections
The Satronic control box for the Broag remeha Gas 5a
series boilers is prewired for the operation of all controls
in the correct ignition and shut-down sequences. These
include high limit protection, flame detection, thermostatic
control and safety shut-off. Provision for manual reset is
made in the event of high limit shut-down and flame failu-
re. An indication lamp within the control box illuminates in
the event of control malfunction. A 240 volts ~ 50 Hz
single phase supply should be connected to the live and
neutral terminals in the junction box.
The control box operates on a neutral/phase supply. The
earth conductor should be connected to the earth bar
using the screw provided with an anti-spread washer.
These conductors should be entered via one of the cable
entry glands. A wiring diagram is fixed inside the lid of the
junction box and is also included in this manual (see
section 8.4). Time controls and remote thermostats can
be connected across terminals 12 and 13 after removal of
the link. These controls should be BEAB or BSI
approved.
8.3 Electric data
Main supply: 240 V-50 Hz (L/N).
Running current: 120 W.
Maximum fuse: 6Amp.