16
Enhanced Sounds
Station Sounds
Station Sounds are activated with the
From an initial power up start condition, press
. A Station Sounds
effect will play every time
is pressed. Once the locomotive starts
moving and for 10 seconds 1 of 4 different Station Departure sound
effects will play. Note: If a Yard sound effect key is defined and
pressed as the last key before moving the locomotive, than the 1 of 4
different sounds playing during the 10 second period of time will be
Yard Departure sounds.
After 10 seconds, all Station Sounds are off and will not play unless
is pressed again. From this moving condition and after 10
seconds, pressing
plays an arrival sound effect once and on
subsequent presses of
, plays 1 of 3 different arrival sound effects
until the locomotive stops. Once stopped, 1 of 4 different sound
effects will continue to play until the
sequence now repeats.
At any time when the locomotive is stopped, throttling up and down
within 10 seconds will de-activate the Station sounds. Reactivation is
accomplished by pressing the
Station Sounds may also be activated for just the arrival. Press
after 10 seconds of movement and hear just the arrival sounds. Once
stopped, throttle to one and then zero.
