KSR Series User Manual
31
3.1.4
Replace Longer Bracket Steps (For rack depth 828~1000mm)
1. Release six screws.
2. Take rear bracket out.
2
Input rear long bracket to rear of the rail then adjust rear bracket to fit your
cabinet. Tight-up 2~3 screws upon the length you need. One is forbidden.
4. Repeat step 1~3 for the other side.
5. Repeat 3.1.3 step to install console.
3.1.5
Unload Steps
1. Make sure the console is lock.
2. Release three screws in rear of the console. (Both sides)
Rear long bracket
Original bracket
