Broadfeet RDAC-114-51 Скачать руководство пользователя страница 1

Страница: 1 / 3

1 |

P a g e

Qty Hardware

Qty

Hardware

Mounting Brackets

Screw [ for the bar to the brackets ]

Screw [ to the chassis ]

Flat Washer [ for the bar to the brackets ]

Flat Washer [ to the chassis ]

Lock Washer [ for the bar to the brackets ]

Lock Washer [ to the chassis ]

Nut [ for the bar to the brackets ]

INSTALLATION INSTRUCTIONS

2014-2015 ACURA MDX

REAR BUMPER GUARD – DOUBLE PIPE PART# RDAC-114-51

Содержание RDAC-114-51

Страница 1: ... to the brackets 4 Screw to the chassis 8 Flat Washer for the bar to the brackets 4 Flat Washer to the chassis 4 Lock Washer for the bar to the brackets 4 Lock Washer to the chassis 4 Nut for the bar to the brackets INSTALLATION INSTRUCTIONS 2014 2015 ACURA MDX REAR BUMPER GUARD DOUBLE PIPE PART RDAC 114 51 ...

Страница 2: ...instructions carefully before starting installation STEP2 Starting from the Driver Side Rear locate two holes that closer to the vehicle end Fig1 STEP3 Select the Driver Side Mounting Bracket bolt it onto the chassis using 2 Screws 2 Lock Washers and 2 Flat Washers Fig2 Fig 1 Fig 2 ...

Страница 3: ...ct the rear bumper guard and install it on the mounting brackets using 2 Screws 2 Lock Washers 4 Flat Washers and 2 Nuts on each side Tighten all hardware at the end to finish the installation Fig3 Fig4 Fig 3 Driver Side Installation Finished Fig 4 Passenger Side Installation Finished Do NOT use this hole Do NOT use this hole ...