Broadcom Emulex LPe12000 Series, Руководство по установке, Страница: 12 / 50

Broadcom LPeHBAs-IG126-100
12
Emulex Host Bus Adapters Installation Guide
Figure 1: Typical Optical Transceiver
CAUTION! This is a delicate operation. Take care not to damage the optical transceiver.
To remove a transceiver, pull the bail (handle) out and down to release the latch, and gently pull out the transceiver. Do
not force it. After the latch is released, the transceiver slides out easily.
Figure 2 shows a transceiver with the latch released (bail extended) and another transceiver latched in place.
Figure 2: Releasing the Latch on an Optical Transceiver
Figure 3 shows an extracted transceiver and another transceiver latched in place.