Broadcom ACPL-352J, Справочное руководство

Страница: 8 / 42

Broadcom ACPL-352J-EB1200-RM100
8
ACPL-352J Reference Manual Infineon EconoPIM™ 3 IGBT Module EB1200-352J Evaluation Board
2.1 Design Features
The EB1200-352J includes the following main features:

Seven isolated ACPL-352J gate drivers with the following features:
– Dual output drive to control turn-on and turn-of time independently
– Overcurrent (OC) protection with configurable soft shutdown function
– Gate status feedback
– Undervoltage lock out (UVLO)
– Active Miller clamp
– Overcurrent fault and UVLO status feedback signal

The ACPL-C87A optical amplifier enables isolated temperature measurement with the following features:
– 0 to 2V nominal input range
– 100-kHz bandwidth
– 3V to 5.5V wide supply range for the output side
– 15-kV/µs common-mode transient immunity

Electrically and mechanically suitable for an 800V DC bus.

EconoPIM™3 modules (FP75R12KT4/FP50R12KT4G).

24V/5V DC-DC power supply with current limit protection and thermal shutdown.

Isolated power supplies for gate drivers.

Access to PWM input signals.

Access to the drivers' gate and overcurrent Fault and UVLO output signals for protection and control development
purposes.

An integrated DC bus with access to DC bus terminals.

Access to the brake chopper terminal.

Easy access to leg current using a Rogowski coil probe for switching characteristics evaluation.
2.2 Target Applications
The Broadcom ACPL-352J gate driver targets the following applications:

Isolated IGBT/Power MOSFET gate drives

Renewable energy applications

AC and brushless DC motor drives

Industrial inverters

Switching power supplies