background image

1. 

Open the harness buckle  21  (press red button)

2. 

Press the adjusting button  26  and at the same time pull both 

shoulder belts  08  forwards. Do not pull on the shoulder 

pads  19  .

3. 

Have your child sit down in the child seat.

21

26

08

19

4. 

Guide the two buckle latches   20  

together and engage them befo-

re putting them into the harness 

buckle  21  - this should make a 

clicking noise.

Pull on the adjusting strap  09  until the harness lies flat and is 

close against your child‘s body.

 CAUTION! Pull out the adjusting strap to the front.

CAUTION! The hip straps 

27

 

must be positioned as low 

as possible over your child‘s hips.

20

21

09

27

7. 

Push the child seat towards the backrest applying firm, even 

pressure on both sides.

8. 

Shake the child safety seat to make sure it is safely attached 

and re-check to the green safety buttons  04  to make sure 

that both of them are completely green.

9. 

Take the Top Tether  13  and press the metal tongue  16  away 

from the strap to lengthen the strap and pull the Top Tether 

13

 by the snap hook  17  until it makes a V-shape.

10. 

Guide the Top Tether  13 on the left and right-hand sides 

past the headrest.

To remove the child seat follow the steps in section 10

11. 

Hook the snap hook  17  into the Top Tether anchoring point 

recommended in your vehicle owner‘s guide.

 CAUTION!

 Be sure not to use the luggage hook instead of 

the Top Tether point. Check your vehicle and look for this 

sign: 

5. 

Place the child seat facing in the direction of travel on the 

vehicle seat. 

6. 

Pull the vehicle belt  22  out and guide it through the belt 

guides  23  of the child seat. Make sure that the belt is not 

twisted.

7. 

Engage the buckle tongue in the vehicle seat buckle  29  

CLICK!

8. 

On the side opposite the car seat belt buckle, swivel 

clamping lever  24  down and insert diagonal belt in belt 

lock-off   25 .

9. 

Apply your body weight to the child seat (kneel into the 

seat). At the same time pull the diagonal belt strongly to 

tighten (hold tension) and swivel the clamping lever  24

upwards until it engages.

10. 

To re-tension pull the diagonal belt whilst the belt lock-off 

25

 is closed.

1. 

Make sure that the child seats 5-point harness is installed 

correctly (see section 9) 

2. 

Make sure that the child seats metal plate is in the right 

position (see section 9 step 7)

3. 

Follow the steps in section 6.2

4. 

Take the Top Tether  13  from the stow-pocket  14  and lay it 

over the child seat.

11. 

Take the Top Tether  13  and press the metal tongue  16  

away from the strap to lengthen the strap and pull the Top 

Tether  13  by the snap hook  17  until it makes a V-shape.

12. 

Guide the Top Tether  13  on the left and right-hand sides 

past the headrest.

13. 

Hook the snap hook  17  into the Top Tether anchoring point 

recommended in your vehicle owner‘s guide.

 CAUTION!

 Be sure not to use the luggage hook instead of 

the Top Tether point. Check your vehicle and look for this 

sign: 

14. 

Tension the strap of the Top Tether  13  until the tension 

 indicator  18  turns green and the Top Tether  13  is tightly 

tensioned.

15. 

Follow the steps in section [securing your child with 5-point 

harness].

5. 

Push both ISOFIT locking arms  15  into the insert guides 

02

 , until the ISOFIT locking arms  engage on both sides. 

„CLICK!“

 CAUTION! 

The locking arms are only correctly engaged if  

both of the green safety buttons  04  are completely green.

1. 

Make sure that the child seats 5-point harness is removed 

correctly (see section 8)

2. 

Follow the steps in section 6.1

3. 

Follow the steps in section 6.3

4. 

Place the child seat facing in the direction of travel on the 

vehicle seat.

6. 

Push the child seat towards the backrest applying firm, even 

pressure on both sides.

7. 

Shake the child safety seat to make sure it is safely attached 

and re-check to the green safety buttons  04  to make sure 

that both of them are completely green

8. 

Have your child sit down in the child seat.

9. 

Pull out the vehicle seat belt and guide it in front of your child 

to the vehicle seat buckle  29 .

 CAUTION!

 Do not twist the belt.

10. 

Engage the buckle tongue in the vehicle seat buckle  29  

CLICK!

11. 

Place the diagonal seat belt section  11  and lap belt secti-

on  28  on the side of the vehicle seatbelt buckle  29  under 

the armrest and into the light red belt guide  23  of the seat 

cushion.

12. 

 CAUTION! 

The vehicle seatbelt buckle  29  must not 

be positioned between the light red belt guide  23  and the 

armrest.

13. 

Place the lap belt section  28  on the other side of the seat 

cushion in the light red belt guide  23 .

 CAUTION! 

 The lap belt section  28  must lie as low as 

possible over your child‘s hips on both sides

14. 

Guide the diagonal seat belt section  11  into the dark red 

belt holder  30  of the headrest  07  until it lies completely in 
the belt holder  30  and is not twisted.

Tip! If the backrest  31  conceals the belt holder  30 , you can 

adjust the headrest  07 upwards. The diagonal seat belt secti-

on  11  can now be easily inserted. Now return the

headrest  07  to the proper height.

15. 

Make sure that the diagonal seat belt section  11  runs over 

your child‘s shoulder bone, and not in front of his or her 

neck.

Tip! You can still adjust the height of the headrest  07  again 

here in the vehicle.

 CAUTION! 

The diagonal seat belt section  11  must run 

diagonally backward. You can adjust the course of the belt with 

your vehicle‘s adjustable belt deflector.

 CAUTION! 

The diagonal seat belt section  11  must never 

lead forward to the vehicle‘s belt deflector.

In this case, only use the child seat on the rear seat.

 

For the safety of your child, before every journey in the car check that...

 

the child safety seat is engaged on 

both

 sides with the ISOFIT locking arms  15  

in the ISOFIT attachment points  01  and that both green safety buttons  04  are 

completely green;

 

the child safety seat is securely fastened;

 

the lap belt section  28  runs through the light red belt guides  23  on both sides of 

the seat cushion,

 

the diagonal seat belt section  11  on the side of the vehicle seatbelt buckle  29  also 

runs through the light red belt guide  23  of the seat cushion,

 

the diagonal seat belt section  11  runs through the dark red belt holder  30  of the 

headrest,

 

the diagonal seat belt section  11  runs diagonally backward,

 

the straps are tight and 

not

 twisted,

 

the vehicle seatbelt buckle  29  is not positioned between the light red belt guide  23   

and the armrest of the seat cushion.

 

 Caution:

 If your child attempts to open the ISOFIT safety buttons  04  or the 

harness buckle  21 , make sure to stop at the earliest opportunity. Check that the 

child safety seat is correctly attached and make sure that your child is properly 

secured. Teach your child about the dangers involved.

1. 

Make sure that the child seats 5-point harness is removed 

correctly (see section 8)

2. 

Follow the steps in section 6.3

3. 

Pull out the vehicle seat belt and guide it in front of your child 

to the vehicle seat buckle  29 .

 CAUTION!

 Do not twist the belt.

4. 

Engage the buckle tongue in the vehicle seat buckle  29 . 

CLICK!

5. 

Place the diagonal seat belt section  11  and lap belt section 

28

 on the side of the vehicle seatbelt buckle  29  under 

the armrest and into the light red belt guide  23  of the seat 

cushion.

 CAUTION! 

The vehicle seatbelt buckle  29  must not be 

positioned between the light red belt guide  23  and the 

armrest.

6.  

Place the lap belt section  28  on the other side of the seat 

cushion in the light red belt guide  23 . 

 CAUTION! 

 The lap belt section  28  must lie as low as 

possible over your child‘s hips on both sides.

7. 

Guide the diagonal seat belt section  11  into the dark red 

belt holder  30  of the headrest  07  until it lies completely in 

the belt holder  30  and is not twisted.Tip! If the backrest  31  

conceals the belt holder  30 , you can adjust the headrest 

07

 upwards. The diagonal seat belt section  11  can now 

be easily inserted. Now return the headrest  07  to the 

proper height.

8. 

Make sure that the diagonal seat belt section  11  runs over 

your child‘s shoulder bone, and not in front of his or her 

neck. Tip! You can still adjust the height of the headrest  07  

again here in the vehicle. 

 CAUTION! 

The diagonal seat belt section  11  must run 

diagonally backward. You can adjust the course of the belt 

with your vehicle‘s adjustable belt deflector.

 

 CAUTION! 

The diagonal seat belt section  11  must 

never lead forward to the vehicle‘s belt deflector. In this 

case, only use the child seat on the rear seat

12. 

Tension the strap of the Top Tether  13  until the tension 

 indicator  18  turns green and the Top Tether  13  is tightly 

tensioned.

13. 

Follow the steps in section [securing your child with 5-point 

harness].

6. 

Grasp the child seat with both hands and slide the two 

locking arms 15  firmly into the insert guides  02  until the 

locking arms engage with a clicking noise on both sides.  

The green ISOFIX safety button  04  must now be visible 

on both sides.

 CAUTION! 

The locking arms are only correctly engaged if 

both of the ISOFIX safety buttons  04  are completely green.

1. 

Make sure that the child seats 5-point harness is installed 

correctly (see section 9).

2. 

Follow the steps in section 6.1

3. 

Follow the steps in section 6.2

4. 

Take the Top Tether 13  from the stow-pocket 14  and lay it 

over the child seat.

5. 

Place the child seat facing in the direction of travel on the 

vehicle seat. 

GROUP 1 (9-18 kg)

With  Top  5-point harness

A1

 

For the safety of your child, before every journey in the car check that...

 

 the child safety seat is engaged on both sides with the ISOFIX locking arms  15  

in the ISOFIX attachment points  01  and that both green safety buttons  04  are 

completely green;

 

 the child seat is securely fastened;

 

 the Top Tether  13  is tightly tensioned over the backrest of the car seat and the 

tension indicator  18  is green;

 

the straps of the child safety seat are close to the body without constricting the 

child;

 

the shoulder belts  08  are correctly adjusted and the straps are not twisted;

 

the shoulder pads  19  are in the right position on your child‘s body;

 

the buckle latches  20  are engaged in the harness buckle  21 .

 Caution:

 If your child attempts to open the green ISOFIX safety buttons  04  or the 

harness buckle  21  , make sure to stop at the earliest opportunity. Check that the 

child safety seat is correctly attached and make sure that your child is properly 

secured. Teach your child about the dangers involved.

GROUP 2 (15-25 kg) - EXTENDED HARNESS

With vehicle belt  + Top  5-point harness

B1

 

For the safety of your child, before every journey in the car check that...

 

the child seat is firmly installed in the vehicle.

 

the belt is not twisted.

 

the tongue and the buckle of the vehicle seat belt are not positioned in the belt 

guides of the child seat.

 

the Top Tether  13  is tightly tensioned over the backrest of the car seat and the 

tension indicator  18  is green;

 

the diagonal belt is only clamped by the lock-off which is located on the opposite 

side from the car seat belt buckle.

 

the straps of the child safety seat are close to the body without constricting the 

child; 

 

the shoulder belts  08  are correctly adjusted and the straps are not twisted;

 

the shoulder pads  19  are in the right position on your child‘s body;

 

the buckle latches  20 are engaged in the harness buckle 21.

 CAUTION!

 If your child attempts to open the harness buckle  21 , make sure to 

stop at the earliest opportunity. Check that the child safety seat is correctly atta-

ched and make sure that your child is properly secured. Teach your child about 

the dangers involved.

GROUP 2 (15-25 kg) &

GROUP 3 (22-36 kg)

With vehicle belt 

C2

A correctly adjusted headrest  07  ensures optimal protection 

for your child in the safety seat:

The headrest  07  must be adjusted so that the shoulder belts 

08

 are at the same level as your child’s shoulders or slightly 

above.

 

CAUTION!

 The shoulder belts  08  must not run behind 

the back of the child or at ear height or above the ears.

 

The shoulder belts are adjusted as follows:

1. 

Loosen the 5 point harness  38  of the child seat as much 

as possible.

Backside of the child seat:

2. 

Press the button of the shoulder belt height adjuster  10  at 

the rear of the seat shell and tilt the shoulder belt height 

adjuster  10  towards you.

3. 

Slide the shoulder belt height adjuster  10  to select the 

correct height of the shoulder belts  08  and engage it in 

the positon that fits for your child by releasing the button.

A correctly adjusted headrest 07  ensures that the diagonal 

seat belt section  11  is optimally positioned, and gives your 

child the optimal protection.

The headrest 07  must be adjusted so that there is a space 

two fingers wide between the headrest  07  and your child‘s 

shoulders.

To adjust the height of the headrest to fit your child:

1. 

Reach into the adjustment handle 12  on the back of the 

headrest 07  and pull it towards you.

This unlocks the headrest.

2. 

You can now move the unlocked headrest 07  to the desi-

red height. As soon as you release the adjustment handle  

12

 the headrest 07  will lock into place.

3. 

Place the child seat on the vehicle seat.

4. 

Have your child sit down in the child seat and check the 

height.Repeat this process unti the headrest 07  is at the 

optimal height. 

6.3. Adjusting the headrest 

1. 

If your vehicle is not equipped with the ISOFIX insert 

guides as standard, clip the two insert guides  02  which 

are included with the seat* with the cut-out facing 

upwards onto the two ISOFIX attachment points  01 of 

your vehicle.

TIP: The ISOFIX attachment points are located between the 

surface and the backrest of the vehicle seat.

2. 

Move the head restraint on the vehicle seat to the 

upper position.

3. 

 Pull the grey fabric loop  03  to pull out both locking arms 

15  until you hear a clicking sound which indicates they 

are fully engaged. 

 

 

4. 

On both sides of the seat squeeze the green safety button 

04

 and the red release button  05  together and remove 

the connector protection  06 .

* The insert guides make it easier to install the child safety seat with the aid of the ISOFIX attach-

ment points and prevent damage to the seat covering. When not in use, they should be removed 

and stored in a safe place. On vehicles with a folding backrest the insert guides must be removed 

before the backrest is folded.

Any problems which occur are usually caused by dirt or foreign objects on the insert guides and 
on the hooks. Clean off any dirt or foreign objects to remedy this type of problem.

6. PREPARATORY WORK  

6.1 Prepare ISOFIX   

6.2 Adjusting the headrest with 5-point harness

 

GROUP 2 (15-25 kg) &

GROUP 3 (22-36 kg)

With  vehicle belt 

C1

 

For the safety of your child, before every journey in the car check that...

 

the child safety seat is securely fastened;

 

the lap belt section  28  runs through the light red belt guides  23  on both sides of 

the seat cushion,

 

the diagonal seat belt section  11  on the side of the vehicle seatbelt buckle  29  also 

runs through the light red belt guide  23  of the seat cushion,

 

the diagonal seat belt section  11  runs through the dark red belt holder  30  of the 

headrest,

 

the diagonal seat belt section  11  runs diagonally backward,

 

the straps are tight and 

not

 twisted,

 

the vehicle seatbelt buckle  29  is not positioned between the light red belt guide  23  

and the armrest of the seat cushion.

 CAUTION!

 If your child attempts to open the harness buckle  21 , make sure to 

stop at the earliest opportunity. Check that the child safety seat is correctly atta-

ched and make sure that your child is properly secured. Teach your child about 

the dangers involved.

To remove the child seat follow the steps in section 10

To remove the child seat follow the steps in section 10

To remove the child seat follow the steps in section 10

02

01

7. INSTALLATION

Please read the chapter with your desired installation method in chapter 7 first.

03

15

04

05

06

07

08

10

07

11

12

SECURING YOUR CHILD WITH 5-POINT HARNESS

4. 

Guide the two buckle latches   20  

together and engage them befo-

re putting them into the harness 

buckle  21  - this should make a 

clicking noise.

Pull on the adjusting strap  09  until the harness lies flat and is 

close against your child‘s body.

 CAUTION! Pull out the adjusting strap to the front.

CAUTION! The hip straps 

27

 

must be positioned as low 

as possible over your child‘s hips.

1. 

Open the harness buckle  21  (press red button)

2. 

Press the adjusting button  26  and at the same time pull both 

shoulder belts  08  forwards. Do not pull on the shoulder 

pads  19  .

3. 

Have your child sit down in the child seat.

SECURING YOUR CHILD WITH 5-POINT HARNESS

21

26

08

19

20

21

09

27

1 cm

13

14

15

04

17

16

17

18

13

14

22

23

24

25

25

17

16

15

04

29

29

1 cm

18

17

11

28

23

28 23

11

30

07

11

07

11

07

11

30

07

28

23

29

38

11

28

23

Отзывы: