.
To prolong the life of your nursery product keep it clean and do not leave it in the
direct sunlight for extended periods of time.
.
Removable fabric covers and trims may be hand washed using warm water with
only a mild soap or a mild detergent. Allow it to dry fully, preferably away from the
direct sunlight.
.
Non removable fabric covers and trims may be spot cleaned using warm water with
a damp sponge with only a mild soap or a mild detergent.
.
When using your stroller at the beach, completely clean all the parts directly
afterwards to remove the sand and salt especially from the mechanisms and wheel
assemblies.
.
Do not fold or store this product if it is damp or wet to avoid mould or mildew
occurring. Always store this product in a well ventilated area.
.
If the wheels or suspension squeak, use a silicon based spray ensuring it
penetrates all of the wheel and axle or suspension assembly parts.
.
If there are compression marks on the tyres, use a domestic hair dryer to gently
warm the tyre and the compression marks should slowly disappear. (Do Not Overheat).
.
Check parts regularly for tightness of screws, nuts and other fasteners, and tighten
if required. To maintain the safety of your nursery product, seek prompt repairs for
bent, torn, worn or broken parts. Use only those parts and accessories tested and
approved by Britax.
PARTS LIST
A.
1 x Stroller Frame
B.
1 x Seat unit
C.
1 x Canopy
D.
1 x Armrest Bar
E.
2 x Front Wheel
Assembly
F.
2 x Rear Wheels
Assembly
G.
Raincover
10
03
CARE & MAINTENANCE
www.britax.com.au
www.britax.com.au
B
C
D
E/F
G
A
NOTES
