16
17
HOW TO SET-UP
HOW TO SET-UP
C. Move the two harness tongues to the
outer extents of the infant carrier.
Move the harness buckle towards the
Harness Adjuster.
D. Place baby into Infant Carrier lying on
its back so that the buckle is between
the baby’s legs.
Correct fitment of the harness is very important as it restrains the
baby in the Infant Carrier. The harness must fit firmly around upper
torso of the baby and be positioned so as to leave the baby’s arms
and legs free.
This Infant Carrier needs to be used until the baby reaches the
shoulder height marker. It is acceptable for the legs to be bent to fit.
E. The Infant Carrier is fitted with three shoulder strap positions. As
the baby grows, the shoulder straps must be moved to higher
slots.
The shoulder straps must be
in the slots which are nearest
to the child’s shoulders, but
not lower than the child’s
shoulders.
If the baby is new born you will need to use either slot 2 or 3. With
the baby in the carrier, check that the slot is just above the baby’s
shoulder. If the strap is not in that slot then change the slot as
described on the next page. If the slot is just above the shoulders
then go to page 20.
1. Upper shoulder strap slots
2. Medium shoulder strap slots
3. Lower shoulder strap slots
4. Shoulder harness strap
5. Harness tongues & buckle
6. Lap strap slot
7. Crotch strap slot
8. Maximum Shoulder Height Marker
9. Harness Adjuster (under cover flap)
10. Adjuster Strap
8
1
2
3
4
4
5
6
6
7
9
10
