Instructions for Installation & Use
25
HOW TO USE
TO REMOVE CHILD
Disengage seatbelt tongue and buckle. Remove
the lap portion of seatbelt from the SecureGuard™
Device, and remove belt from child. When Booster
is not being used, secure in position, by engaging
seatbelt over the booster seat or store in a safe
place.
Lap belt must always be firm on the thighs.
The SecureGuard™ Device must be positioned
on the lap belt so that the child cannot slump or
slouch.
Feed all the lap belt slack and sash belt slack back
to retractor.
Adjust headrest so it is close to the shoulders.
Seatbelt across the chest and through the sash
guides.
NOTE:
Seatbelt extenders should not be used if the seatbelt is not long enough to fit around
the child. If a seatbelt extender is used then the seatbelt buckle must not be in contact with
the child.
CHILD USE
(BOOSTER SE
AT
MODE)
SETUP CHECKLIST
