Instructions for Installation & Use
23
D. Fit the SecureGuard™ Device to the
lap belt. Correct device adjustment
will position the lap belt directly across
the hips/thighs of the child. Ensure the
SecureGuard™ straps are adjusted
as described on page 19. Ensure the
bottom edge of the lap belt is in line with
the thighs. The SecureGuard™ Device
logo must be facing forward to the Lap
Belt.
E. Adjust lap and sash portion of seatbelt
firmly but comfortably across the child’s
lap and chest.
F. Ensure all slack is removed from the lap
belt and is fed via the sash-belt back to
the retractor. The lap belt should fit firmly
across the hips/thighs and the sash belt
diagonally across the chest.
G. A loose or poorly fitted seatbelt may
cause preventable injuries if instructions
are not followed.
HOW TO USE
Ensure
both lap
and sash
belts are
in recess
area
Ensure lap
portion is
in recess
area
CHILD USE
(BOOSTER SE
AT
MODE)
Sash belt
across the
chest and
through the
sash guide
Follow arrows to remove slack
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
:
The SecureGuard™ device
must always be setup to position the lap belt correctly on
the child's hips and thighs. The occupant may be injured in an vehicle crash if the
SecureGuard™ device is set too high. DO NOT attempt to remove or dismantle the crotch
strap and SecureGuard™ device.
CAUTION:
ALWAYS USE THE SECUREGUARD™ DEVICE
