background image

Instructions for Installation & Use

 - Series No. 8100/A/2010

Instructions for Installation & Use

 - Series No. 8100/A/2010

68

69

Precautions to prevent reducing the 

safety offered by this booster seat.

With In-built Harness

1. 

Ensure seatbelt is fitted to the seat and is tight.

2. 

Ensure upper anchorage strap is attached to the car's anchor fitting and slack is removed.

3. 

Ensure the in-built harness is fitted firmly to the child. A loose harness is dangerous.

As a Booster Seat

1. 

Ensure seatbelt is fitted to the seat.

2.

 Ensure the seatbelt is used and fitted correctly. The lap belt must be on thighs and not the abdomen 

and the sash belt must always be across the chest.

3.

 Ensure the child does not slouch or slump and the sash belt is across the chest. 

4. 

A sash belt under the arm or behind the back is dangerous. (A child harness can resolve this). 

5. 

Ensure that if you are using a child harness that the lap belt is firm on the child’s thighs and not on 

the abdomen. Do not tighten the child harness tether strap, just remove slack.

6.

 Always use the Sash Guide in the headrest. Always use the SLIDEGUARD™ Converter.

7.

 Ensure you advise the child not to undo the seat belt buckle unless told to do so.

If your restraint has been involved in a severe crash, you should destroy the restraint even if no damage 
is obvious. Some insurance companies offer vehicle insurance which covers or partially covers the 
replacement of your child restraint. Contact your insurance company for further details. Your insurance 
company may require you to keep the child restraint for assessment, 

but do not use the child restraint 

after a severe crash. 

To assist you in making an accident insurance claim cut the following statement 

and include it with your claim.

IN CASE OF ACCIDENT

All Safe-n-Sound child restraints are manufactured to Australian/New Zealand 
Standards AS/NZS1754-2010 which require us to advise users of child restraints 
to "Destroy the entire restraint if it has been in use in a severe crash, even if no 
damage is obvious". The joint Australian/New Zealand Standards committee 
CS/85, advise that this statement applies whether a child was in the child restraint 
or not. A severe crash, we consider as being one where the main body structure 

of the vehicle is distorted.

There is no method of determining if the restraint has been damaged and we 
concur with the Australian/New Zealand Standards in recommending destruction 

of the child restraint.

This notice is to advise you of the requirements of the Australian/New Zealand 
Standards and our obligation in complying with the standards.
Please assist the owner of this restraint in their claim.

NOTICE TO INSURANCE COMPANY CHILD 

RESTRAINT INVOLVED IN AN ACCIDENT

New Zealand Office:

 

Britax Childcare NZ Limited.
PO Box 100-247 Auckland 9
Telephone:  0508 688 822

Britax Childcare Pty. Ltd.

(Incorporated in Victoria)
A.B.N 55 006 773 600
Head office and registered address:
99 Derby Road  Sunshine  Victoria  3020
PO Box 147  Sunshine  Victoria  3020
Telephone:  1300 303 330

Содержание Maxi AHR Easy Adjust






































Отзывы: