1
Cut old adjuster strap.
3
From rear of seat, pull straps up to
remove yoke from behind belt guard,
then slide both shoulder straps off metal
yoke.
4
Discard old adjuster strap.
2
Completely loosen shoulder straps by
lifting the adjuster lever while pulling
the harness straps forward.
WIZARD ONLY:
Fully raise headrest
before proceeding.
5
Attach shoulder straps to yoke on
new adjuster strap.
IMPORTANT:
Attachment must be
exactly as shown in photo for correct
alignment. White tab must be toward seat.
6
Drop loose end of adjuster strap
between black belt guide and rear of
seat.
7
Route loose end of adjuster strap over
base to the front.
Adjuster Strap
Replacement Instructions
for Marathon
™
& Wizard
™
Items required:
-Scissors
-New adjuster strap
Overview: Front
Overview: Rear